Find Heating Contractors in Overland Park, KSCall Now - Free Quote

Heating Contractors in Overland Park, KS

12 zip codes with active providers. Average bid: $118 (national: $116.18).

City Avg

$118

State Avg

$98.08

National Avg

$116.18

Cost Index

55

Furnace & Heating Repair Costs in Overland Park

Typical range: $150–$500 for repairs; $3,500–$10,000 for system replacement

Furnace diagnostic and minor repair$150–$400
Igniter or flame sensor replacement$150–$300
Blower motor replacement$400–$900
Heat exchanger replacement$1,500–$3,500
Gas furnace replacement (80,000 BTU)$3,500–$7,500
Heat pump system installation$5,000–$12,000

Hiring a Furnace & Heating Repair in Overland Park

Emergency service available — many offer same-day appointments

Your furnace won't ignite or keeps shutting off after running briefly — could be a bad igniter, flame sensor, or control board

You smell gas near your furnace or anywhere in the house — leave immediately and call your gas company, then a heating tech

The furnace is blowing cold air or lukewarm air instead of the hot air it should

NATE certification in gas heating or oil heating, depending on your system type

State HVAC or mechanical contractor license — required in most states for gas work

Experience with your specific system type: gas furnace, oil furnace, heat pump, boiler, or radiant heating

Common Furnace & Heating Repair Problems in Overland Park

Failed igniter (hot surface igniter) — the most common reason a gas furnace won't start, usually a $150–$300 repair
Dirty or cracked flame sensor that shuts the furnace off seconds after it lights as a safety precaution
Clogged condensate drain on high-efficiency (90%+) furnaces, triggering a safety lockout
Cracked heat exchanger — a serious safety concern that leaks carbon monoxide into your living space

Questions to Ask a Furnace & Heating Repair in Overland Park

Can you perform a combustion analysis to check my furnace's safety and efficiency?

A combustion analysis measures the gases in your flue to detect carbon monoxide production and verify the furnace is burning fuel efficiently. This is the best way to catch a cracked heat exchanger early.

If the heat exchanger is cracked, how did you verify it?

A cracked heat exchanger diagnosis means replacing the furnace (usually $3,500–$7,500). Some technicians claim this to push a sale. A trustworthy tech will use a combustion analyzer and show you the crack with a camera or mirror.

Is repair worthwhile at this point, or am I better off replacing?

A good rule of thumb: if the repair costs more than half the price of a new furnace and your unit is over 15 years old, replacement usually makes more financial sense. An honest technician will give you a straight answer.

Red Flags When Hiring

  • Diagnoses a cracked heat exchanger without performing a combustion analysis or showing you physical evidence
  • Recommends a full system replacement on the first visit without attempting a repair on a system under 15 years old
  • Doesn't check carbon monoxide levels as part of their diagnostic process — this is a basic safety step
  • Can't explain what's wrong in plain language or rushes through the diagnosis

Safety Tips

  • If you smell natural gas (rotten egg odor) near your furnace, do not flip any switches or create any sparks — leave the house and call your gas utility's emergency line from outside
  • Install carbon monoxide detectors on every level of your home and near sleeping areas — a cracked heat exchanger can leak CO without any visible signs
  • Never close off more than 20% of your supply vents to 'redirect' heat — this builds excessive static pressure that can crack the heat exchanger over time

Cost Comparison

Overland Park: $118+1.6% vs National Avg

Dashed line = National Avg ($116)

Overland Park: $118+20.3% vs Kansas Avg

Dashed line = Kansas Avg ($98)

Pricing by Zip Code (12 zips)

Zip CodeTop Bidvs City Avg
66204$118.000.0%
66207$118.000.0%
66210$118.000.0%
66212$118.000.0%
66213$118.000.0%
66214$118.000.0%
66221$118.000.0%
66223$118.000.0%
66224$118.000.0%
66225$118.000.0%
66251$118.000.0%
66282$118.000.0%

Get a Free Quote

Get Free Heating Contractors Quotes in Overland Park, Kansas

Compare providers and pricing. No obligation.

By submitting, you agree to be contacted by local service providers.

All Services in Overland Park (28 categories)

Services Not Available

These categories have national coverage but no active providers in Overland Park:

Air Duct CleaningAuto Body ShopsAuto GlassAuto Insurance - Non StandardAuto Insurance - PreferredAuto Repair & ServiceBankruptcy LawyersCar Accident LawyersCarpet Cleaning & RepairChimney RepairsChiropractorsComputer RepairConcrete ContractorsCopier RepairCriminal LawyersDUI LawyersDivorce LawyersEmployment LawyersFamily LawyersFencing Contractors

Frequently Asked Questions

How much does heating contractors cost in Overland Park, Kansas?

The average bid for heating contractors in Overland Park is $118, compared to the national average of $116.18. Prices range from $118 to $118 across 12 zip codes.

How does Overland Park compare to the rest of Kansas?

Overland Park's average bid of $118 is above the Kansas state average of $98.08. The city has a cost index of 55 (100 = national average).

What other services are available in Overland Park?

Overland Park has active providers in 28 service categories. 20 categories have national coverage but no active providers in Overland Park yet.

When should I call a furnace & heating repair in Overland Park?

Your furnace won't ignite or keeps shutting off after running briefly — could be a bad igniter, flame sensor, or control board Many heating contractors in Overland Park offer same-day emergency service.

What should I look for in a furnace & heating repair in Overland Park, Kansas?

NATE certification in gas heating or oil heating, depending on your system type. State HVAC or mechanical contractor license — required in most states for gas work.

What warranty should a furnace & heating repair offer?

Repairs should carry a 30–90 day warranty on labor and the manufacturer's warranty on parts. New furnace installations should come with a 1–2 year labor warranty from the installer plus the manufacturer's warranty (typically 10 years on the heat exchanger, 5 years on parts with product registration).